Featured
Where Is The Pilot Light On A Water Heater
Where Is The Pilot Light On A Water Heater. Water heater is the same as a conventional water heater but without the pilot light. If the light starts to flicker, or goes out, then it would be time to troubleshoot the problem.
You may have to press the igniter several times to get the pilot to relight. The thermocouple is the brain of your water heater. It is not as hot as a blue flame.
It’s Normal And Fine For The Pilot Light To Go Out Once In A While.
Your water heater’s burner won’t work if the gas valve is damaged or. When relit, the water heater pilot light flame should wrap around the thermocouple bulb. The continuous pilot mode will have the flame on at all times.
Search For A Sticker On The Sides Of The Tank That Explains The Meaning Of The Indicator Message.
While intermittent will come on every few. Just turn the heater off. Keep the knob or pilot button pressed down as you relight the burner with a utility lighter.
Continue To Press And Hold Down The Pilot.
Once the pilot is burning well, release the knob and turn it to the ‘on’ setting. That light is an indicator light. Hence, there is no pilot light.
It’s What You Want The Flame To Be When It Isn’t In Use.
It’s responsible for closing the gas valve when it senses the pilot light is off. Pilot mode is what some people refer to as the “standby” or “sleep” setting for your hot water system. Turn the gas control knob to “pilot” and then hold the ignition button down to start the flow of gas.
Check If There Is A Flame In The Pilot Light Tube.
In a gas water heater, the pilot light should be blue. Then, push the button back down and hold it down for about five minutes. If this is the case, you can easily expect it to be the pilot light being out.
Comments
Post a Comment